Factor 55 Rope Retention Pulley Snatch Block 00260

[HIGH CAPACITY]

• The oversized hole radius provides a smooth rubbing surface and keeps the legs of the soft shackle from rubbing on the edges of the RRP.
• A ring pulley can be used to increase the winch's pulling power or redirect the winch line similar to a common snatch/pulley block.
• This style of the pulley can only be used with synthetic winch ropes, not steel cable. It should be used in conjunction with a soft shackle.
• The Sherpa rope pulley can be used to increase the pulling power from your winch. By double line pulling and incorporating a pulley ring, your winch can deliver greater overall pulling power. 
• Rope rings are ideal for heavy load recoveries as it takes stress off the winch motor, meaning the motor can run cooler. Using a rope ring the winch recovery speed is halved however so is the load on the winch, meaning you can often winch heavier loads before reaching the limit of the winch.

ABOUT THIS PRODUCT

The world’s first winch friction pulley with patented rope retention feature. A lightweight alternative to traditional heavy snatch blocks/pulleys. The RRP can be used to increase pulling power or redirect the winch line. The RRP is for use with SYNTHETIC ROPE ONLY and is to be used in conjunction with a soft shackle. During momentary slack, patented rope retention rubber fingers prevent synthetic winch rope from escaping the pulley groove preventing premature rope failure.

The oversized hole radius provides a smooth rubbing surface and keeps the legs of the soft shackle from rubbing on the edges of the RRP. The critical friction surface has also been TEFLON treated to increase slickness and heat dissipation.

SPECIFICATIONS

• Dimensions (L x W x H): 6 × 6 × 2.5 inches.
• For Synthetic Rope Diameters 5/16 to 1/2 inch (8-12mm).
• Billet machined 6000 series aluminum.
• Mil-A-8625 F Hard Anodized Surface.
• WLL 22,000 pounds (97.9 KN).
• Weight: 1.3 lbs.
• Part number: 00260.
• Manufactured in EEUU.